Fisher & Paykel 5 Series Installation Manual page 8

Step
4
Figure 11
Damper
Figure 12
Figure 13
8
VENTILATION SYSTEM
Place the blower unit into the opening
z
and secure it to the oven with the
screws (3) from step 2.
See Figure 11.
Carefully match the exhaust opening
z
location of the microwave and attach the
damper to the rear plate by sliding it into
the guides at the rear plate.
See Figures 12, 13.
Ensure that the damper hinge is on the
z
top and the damper swings freely into
the wall outlet.
C. VERTICAL VENTILATION SYSTEM
1 2
Steps &
A-1 Ventilation motor. See Section B, steps 1 and 2 for access to the blower motor. Also see
Figure 8.
Step
Fan blade openings facing up
3
After turning
Back of oven
Figure 14
Step
4
Figure 15
Figure 16
Figure 17
Turn the blower unit so that the fan
z
blade openings are facing upward.
See Figure 14.
Place the blower unit into the opening.
z
Secure the case blow fan top, the blower
motor and cover to the microwave oven
with the screw (1, 2 and 3) from steps 1
and 2. See Figure 15.
Carefully match the exhaust opening
z
location of the microwave and attach the
damper to blower motor cover by sliding
it into the guides at the blower motor
cover. See Figures 16, 17.
Ensure that the damper hinge is on the
z
front and the damper swings free into
the wall outlet.