IMPORTANT: DO NOT GRIP OR USE HANDLE DURING INSTALLATION.
PREPARATION OF TOP CABINET
You need to drill holes for the top support screws and a hole large enough for the power cord
to fit through.
Read the instructions on the
TOP CABINET TEMPLATE
z
Tape it underneath the top cabinet
z
Drill the holes, following the instructions on the template
z
Note: The
must be taped to the underside of the top cabinet before
TOP CABINET TEMPLATE
proceeding with installation.
Step
Protect the top of your range by placing a portion of the carton or some other heavy
1
material over the cooking surface before mounting your oven.
Step
2
Figure 22
Step
3
Figure 23
10
MOUNTING OVEN TO THE WALL
Lift the microwave oven and
z
tilt it forward. Hang the unit on
two tabs at the bottom of the
mounting plate. See Figure 22.
Thread power cord through the
z
hole at the bottom of the top
cabinet. Swing the unit upward
to meet the top of the mounting
plate and hold it securely.
See Figure 23.
Step
4
Figure 24
Then insert a bolt down through
z
each hole in the upper cabinet
bottom. Tighten the bolts until
the gap between the upper
cabinet and microwave oven is
closed. See Figure 24.