Cabinetry Dimensions - Wall Mounted (Ie Installed With A F&P Compact Oven) - Fisher & Paykel OS24N Installation Manual

5B CABINETRY DIMENSIONS – WALL MOUNTED (ie INSTALLED WITH A F&P COMPACT OVEN)
23 5/8"
Compact oven
(600mm)
Warming drawer
CABINETRY DIMENSIONS
Minimum inside height of cavity
M
with optional Lower trim kit fitted
without optional Lower trim kit fitted
Inside width of cavity
N
Minimum inside depth of cavity
O
Note: When installed in combination with a companion product the companion product may be placed directly onto the warming drawer. It is not
necessary to place a shelf between the products. A built-in shelf at the base of the cabinetry able to support the weight of both products is required.
* PO – POWER OUTLET. Ensure there is an accessible earthed power outlet within 35 7/16" (900mm) of the centre rear of the product.
6 |
WARMING DRAWER INSTALLATION GUIDE
Compact oven
M
Warming drawer
SIDE
M
inches (mm)
23 1/4" (590)
22 1/2" (570)
22" (560)
22 1/4" (565)
O
*PO
Compact oven
Lower trim kit
(optional, supplied separately)
Warming drawer
IMPORTANT!
Additional 11/16" (18mm)
Wood Spacer
In a wall mounted installation,
there needs to be an
Cabinet below
11/16" (18mm) Spacer fixed
underneath the warming
drawer first to raise it to the
required height.
N
PLAN