Electrical Hook-Up; Secure The Oven To The Cabinetry - Fisher & Paykel OS24N Installation Manual

Before connecting to the electricity, make sure that the:
specifications of the electrical system match with what is detailed on this section. (Fig. 1)
●
system has an effective ground connection compliant with current standards and laws.
●
The ground connection is required by law. The cable must not, at any point, reach a temperature greater than 122°F (50°C)
above room temperature.
This oven must be connected to the electricity through a power supply cable and plug that is compatible with the outlet
of the electrical system that powers this oven. If a fixed appliance does not have a power cord and plug, or another device
that ensures disconnection from the mains, with an opening distance of the contacts that allows complete disconnection,
such disconnection devices must be provided in the power supply mains conforming to the installation rules.
The omnipolar socket or switch must be easy to reach when the appliance is installed.
NOTE: The manufacturer declines all liability if the usual accident prevention standards and the above instructions are not followed.
MAX POWER (W) HZ
3000 60 Hz
2250 60 Hz
1 Position the oven in the prepared cavity.
IMPORTANT!
Do not lift the oven by the door handle.
2 Use the supplied screws and spacers to secure the oven
to the cabinetry.
IMPORTANT!
Do not over-tighten the screws.
●
Take care not to damage the lower trim of the oven.
●
Do not seal the oven into the cabinetry with silicone or glue.
●
This makes future servicing difficult. Fisher & Paykel will not cover
the costs of removing the oven, or of damage caused by this removal.
6
VOLTAGE (V) AMPS (A)
240V 12.5
208V 10.8
7

SECURE THE OVEN TO THE CABINETRY

ELECTRICAL HOOK-UP

Ensure supplied spacer
is fitted between oven
and cabinetry
cable from
power supply
red wires
wall wiring
box
white wires
black wires
green grounding
oven wires - UL - listed conduit
factory taped connector
Fig. 1
STEAM OVEN INSTALLATION GUIDE
| 27