Indoor Unit; To Unpack The Indoor Unit; To Remove The Accessories From The Indoor Unit; About The Units And Options - Daikin Altherma EHVH04S18CB3V Installer's Reference Manual

4 About the units and options

3.3

Indoor unit

3.3.1

To unpack the indoor unit

3.3.2 To remove the accessories from the
indoor unit
1 Remove the screws at the top of the unit.
2 Remove the top panel.
3 Remove the screws at the front of the unit.
4 Push on the button on the bottom of the front plate.
5 Remove the front plate.
WARNING: Sharp edges
Take the front plate on the upper part instead of the lower
part. Watch your fingers, there are sharp edges on the
lower part of the front plate.
Installer reference guide
8
1
a~e+h
4×
2
g
f
4
6 Remove the accessories.
a b
1× 1×
e f
2× 2×
a General safety precautions
b Addendum book for optional equipment
c Indoor unit installation manual
d Operation manual
e Sealing ring for shut-off valve
f Shut-off valve
g User interface cover
h 2 screws for fixing the user interface.
7 Reinstall the top panel and the front plate.
4 About the units and options
4.1 Overview: About the units and
options
This chapter contains information about:
▪ Identifying the outdoor unit
▪ Identifying the indoor unit
▪ Combining outdoor and indoor units
▪ Combining the outdoor unit with options
▪ Combining the indoor unit with options
ERLQ004~008CA + EHVH/X04+08S18+26CB
4
2×
3
c d
1× 1×
g h
1× 1×
Daikin Altherma – Low temperature split
4P384973-1A – 2016.02