Table of Contents
Advertisement
The indoor unit must be installed such that there is no short
circuit of the cool discharge. Respect the installation clearance.
Do not put the indoor unit where there is direct sunlight on unit.
The location is suitable for piping and drainage and it must have
a large distance between a door and unit.
Ceiling Concealed Mounting
• Use the hanger supplied with the unit.
• Make sure that the ceiling is suf ciently strong to withstand
the weight.
See Detail A
Insulation material
( eld supply)
Air outlet side
Aluminium tape
( eld supply)
Tighten
Detail A
INSTALLATION OF THE INDOOR UNIT
Air inlet side
Aluminium tape
( eld supply)
Field supply
Washer for hanger
bracket (attached)
Center distance of axle (see drawing below)
Model
FD(Y)M20JEVLK
FD(Y)M25JEVLK
FD(Y)M30JEVLK
FD(Y)M40JEVLK
FD(Y)M50JEVLK
FD(Y)M60JEVLK
Provide clearance for servicing ease and optimal air ow as
shown in the diagram.
* Can be smaller than 300mm if ceiling is removable.
1-8
A
L
A mm (inch)
L mm (inch)
1041 (41.0)
225 (8.9)
1176 (46.3)
225 (8.9)
1262 (49.7)
284 (11.2)
1262 (49.7)
284 (11.2)
1326 (52.2)
256 (10.1)
1526 (60.1)
256 (10.1)
300mm
or more
300mm* or more
Ceiling
2300mm or more
Floor
Advertisement
Table of Contents
