Basic Configuration; Quick Wizard: Language / Time And Date; Quick Wizard: Standard - Daikin Altherma EHVH04S18CB3V Installer's Reference Manual

8 Configuration
1 At power ON, the quick wizard starts as long as the system
layout was NOT confirmed yet, by setting the language.
Language
Select the desired language
Confirm Adjust
2 Set the current date and time.
Date
What is the date today?
Sun Jan
1 2012
Confirm Adjust
Scroll
Time
What is the current time?
00 : 00
Confirm
Adjust Scroll
3 Set the system layout settings: Standard, Options, Capacities.
For more details, see "8.2 Basic configuration" on
A.2
System layout
Standard
Options
Capacities
Confirm layout
Select Scroll
4 After configuration, select Confirm layout and press
Confirm layout
Please confirm the system
layout. The system will
restart and will be ready for
first startup.
OK Cancel
Confirm Adjust
5 The user interface re-initialises and you can proceed the
installation by setting the other applicable settings and
commissioning of the system.
When the installer settings are changed, the system will request to
confirm. When confirmation is complete, the screen will shortly turn
OFF and "busy" will be displayed for several seconds.
8.2

Basic configuration

8.2.1

Quick wizard: Language / time and date

# Code
[A.1] N/A Language
[1] N/A Time and date
Installer reference guide
48
page 48.
1
.
Description
8.2.2

Quick wizard: Standard

Backup heater configuration (only for *9W model)
The backup heater in a *9W model is adapted to be connected to
most common European electricity grids. Besides hardware
configuration, the grid type and the relay setting must be set on the
user interface.
# Code
[A.2.1.5] [5-0D] BUH type:
▪ 1 (1P,(1/1+2)): 6 kW 1~ 230 V (*9W)
▪ 3 (3P,(1/1+2)): 6 kW 3~ 230 V (*9W)
▪ 4 (3PN,(1/2)): 6 kW 3N~ 400 V (*9W)
▪ 5 (3PN,(1/1+2)): 9 kW 3N~ 400 V
(*9W)
Relay setting
Relay setting
If backup heater
step 1 is active:
1/1+2 Relay 1 ON
1/2 Relay 1 ON
Space heating/cooling settings
The system can heat up or cool down a space. Depending on the
type of application, the space heating/cooling settings must be made
accordingly.
# Code
[A.2.1.7] [C-07] Unit control method:
▪ 0 (LWT control): Unit operation is
decided based on the leaving water
temperature regardless the actual
room temperature and/or heating or
cooling demand of the room.
▪ 1 (Ext RT control): Unit operation is
decided by the external thermostat or
equivalent (e.g. heat pump convector).
▪ 2 (RT control): Unit operation is
decided
temperature of the user interface.
ERLQ004~008CA + EHVH/X04+08S18+26CB
Description
Backup heater operation
If backup heater
step 2 is active:
Relays 1+2 ON
Relay 2 ON
Description
based on the ambient
Daikin Altherma – Low temperature split
4P384973-1A – 2016.02