A- -ARM/STRUT ASSEMBLY EXPLODED VIEW (All MODELS)
Always use new bolts
1
upon reassembly
NOTE: Refer to Page 5.10
for Steering Component
Identification.
15--22 ft. lbs.
(20--30 Nm)
40 ft. lbs.
(54 Nm)
Front
30 ft. lbs.
1
(41.4 Nm)
Always use new
2
cotter pins upon
reassembly.
Apply Loctitet 242
30 ft. lbs.
1
(41.4 Nm)
2
25 ft. lbs.
(35 Nm)
BODY/STEERING/SUSPENSION
NOTE: To avoid damage to the tie rod ends and
other steering components, be sure to install tie rod
end bolts in the proper direction. The steering post
arm bolt (B) points up; the rod end bolts (A) point
down. Be sure inner rod ends are placed between
the steering post arms.
12--14 ft. lbs.
(16--19 Nm)
2
25--30 ft. lbs.
(34--41Nm)
40--45 ft. lbs.
(54--61 Nm)
8 ft. lbs.
(11 Nm)
5.11