7.6.3 Alarm Status
The Alarm Status notification message shows each camera's alarm status. To prompt the Alarm Status message,
enable the "Show Message" check mark on the Camera>Motion or the Advanced>Events menus. By default,
this message is disabled.
Index: Represents each camera.
Type of Alarms:
Video Loss: Video loss is regarded as an alarm event and occurs any time the DVR does
not receive an active video signal on any of its inputs.
Motion Detection: Video motion detection occurs when there is movement in front of
your camera.
Video Obstruction: Flags scenarios in which someone may cover the camera's field of
view or if they are attempting to tamper with the video signal.
Notifications Check:
Empty: No trigger detected.
Green Check Mark: Unchecked alarm that already finished.
Red Check Mark: The alarm is happening.
Advanced: Provides information about this window and allows you to adjust alarm notification settings.
OK: Hide the alarm status and verify that the alarm was noticed.
83