Alarm; A) Motion - Night Owl CM-IH8-BA User Manual

7.1.4 Alarm

7.1.4 (a) Motion

Configure the motion alarm settings for your NVR system.
Channel: Select the channel you wish to configure motion alarm settings for.
Buzzer: Enable an audible alarm when the PIR sensor detects heat.
Sensitivity: Adjust the sensitivity of the motion sensor. A lower setting will require more movement in the
camera's field of view for a recording to be triggered.
Motion Area: Selecting Setup will allow you to configure which areas in the cameras field of view will and will
not detect motion. Red boxes denote areas that will detect motion and uncolored boxes denote areas that
will not. When finished, right click to return to the menu.
Post Recording: Determine how long you would like the camera to continue recording after the event which
triggered the recording has ended. You can choose between 30 and 300 seconds.
Show Message: Checking this tick box will result in a green "running man" icon appearing on-screen when
motion is detected while in Live View.
Send Email: Checking this tick box will result in an email alert being sent when motion is detected. See
section 7.1.2 for email setup and configuration.
Full Screen: Checking this tick box will result in the selected channel going to full screen when motion is detected.
Push Notification: Checking this tick box will result in push notifications being sent to your mobile device
when motion is detected on the selected channel. By default, this setting is enabled.
Record Channel: This option allows you to set other cameras to begin recording when motion has been
detected on another camera. For instance, if you are on Channel 1 (Channel field) you can set Channel 2
and 3 to begin recording when motion is detected on Channel 1.
52