Night Owl C80XFR Series User Manual page 19

Follow these instructions to correctly install your cameras.
Locate a camera and choose a location where you would like to mount the camera.
1
Indicate screw positions by marking three holes on the surface where you plan to mount the camera,
2
using the holes in the camera base as a guide.
Using a drill bit slightly smaller than the included screw anchors, drill into the mounting surface
3
using the guide marks you placed in the previous step.
Insert the screw anchors.
4
Line up the camera base holes with the screw anchors. Holding the base in place, insert screws and
5
tighten until secure.
Once the base is screwed in place, make sure that the camera is securely mounted by placing gentle
6
pressure on the mount.
Adjust the camera housing to point in the direction of the area you would like to monitor.
7
19