7.4.2 (b) Using Control Method UTC (Up-The-Coax)
If you are connecting a PTZ camera that utilizes UTC (Up-the-Coax) technology and does not require the use of
the RS-485 port, you will need to change the control method for the channel the PTZ is connected to.
2
As the PTZ camera and DVR will communicate via the BNC Video/Power cable, you will need to change the
control method to UTC. To do so, login to your DVR and the follow these steps:
Select Device.
1
Select PTZ.
2
Select UTC from the drop-down for Control method.
3
Select Apply.
4
1
3
72
4