Table of Contents
Advertisement
6.1.3 Firmware Check
The Firmware Check screen of the Startup Wizard automatically checks for updated firmware for your DVR.
NOTE:
If your DVR does not have a network connection, the firmware will not update.
If a firmware upgrade is detected, the startup wizard displays the screen below. Please select "Upgrade" to
download and install the new upgrade to your system.
Once prompted, the DVR begins updating, and when complete the DVR restarts automatically. This process
could take up to 10 minutes, please be patient.
NOTE:
Do NOT turn off your DVR or disconnect it from the Internet while the system is upgrading.
When the firmware for your DVR is updated to the most current version, the Startup Wizard displays the
below screen.
27
Hide quick links:
Advertisement
Table of Contents
