Firmware Check - Night Owl HC20X Series User Manual

6.1.3 Firmware Check

The Firmware Check screen of the Startup Wizard will automatically check for updated firmware for your DVR.
NOTE: If your DVR does not have a network connection, the firmware will not update.
If a firmware upgrade is detected, the startup wizard will display the screen below. Please select "Upgrade"
to download and install the new upgrade to your system.
Once prompted, the DVR will begin updating and when complete the DVR will restart automatically. This
process could take up to 10 minutes, please be patient.
NOTE: Do NOT turn off your DVR or disconnect it from the Internet while the system is upgrading.
When the firmware for your DVR is updated to the most current version, the Startup Wizard will display the
below screen.
26