Hold/Clear of output at CPU STOP and at CPU stop error
This function sets Hold/Clear of the auto refresh device output when CPU module operation of the cyclic master is at STOP or
at CPU stop error.
The following shows the servo amplifier status at CPU STOP and at stop error.
• At CPU STOP
The servo amplifier behaves in the manner commanded by the controller.
• At stop error
The servo amplifier decelerates the servo motor to a stop.
Remote reset
Resetting can be done by sending the reset command to the specified station.
The reset command can be sent from the Remote Operation window of GX Works2 or GX Works3.
2 CC-Link IE Field Network Basic
88
2.3 Application function