Engineering Tool - Mitsubishi Electric MR-J5-G User Manual

Engineering tool

The following explains the main purposes of the engineering tools used in CC-Link IE Field Network Basic communication.
For specific usages, refer to the manuals of the engineering tool and controller.
Engineering tool list
This list shows engineering tools used in CC-Link IE Field Network Basic.
Engineering tool
MR Configurator2
GX Works2, GX Works3
Description
This is a software that has the following functions: servo amplifier adjustment, monitor display, diagnosis,
reading/writing of servo parameters, and test operation. These functions are performed using a personal
computer.
This tool is used to set the IP address and subnet mask in the network parameters.
This is a software that comprehensively supports the design and maintenance of the programmable controllers.
The software performs settings such as servo amplifier profile (CSP+) registration, network configuration setting
(station specific mode, link device setting, etc.), refresh setting, and network synchronization setting.
2 CC-Link IE Field Network Basic
2.1 Functions and configuration
2
83