Control Panel; Removing The Control Panel - Dell PowerEdge 1800 Installation And Troubleshooting Manual

11
Reconnect the system to its electrical outlet and turn the system on, including any attached
peripherals.
Figure 6-7. Replacing the System Battery
12
Enter the System Setup program to confirm that the battery is operating properly. See "Using
the System Setup Program" in your User's Guide.
13
Enter the correct time and date in the System Setup program's Time and Date fields.
14
Exit the System Setup program.
15
To test the newly installed battery, turn off the system and disconnect it from the electrical
outlet for at least an hour.
16
After an hour, reconnect the system to its electrical outlet and turn it on.
17
Enter the System Setup program and if the time and date are still incorrect, see "Getting
Help" for instructions on obtaining technical assistance.

Control Panel

Removing the Control Panel

CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the
online or telephone service and support team. Damage due to servicing that is not authorized by Dell is
not covered by your warranty. Read and follow the safety instructions that came with the product.
1
Turn off the system, including any attached peripherals, and disconnect the system from the
electrical outlet.
2
Remove the bezel. See "Removing the Bezel" in "Troubleshooting Your System."
system battery
battery connector
Installing System Options
87