Installing And Removing Hot-Plug Scsi Hard Drives - Dell PowerEdge 1800 Installation And Troubleshooting Manual

Installing and Removing Hot-Plug SCSI Hard Drives

NOTE:
SCSI hot-plug functionality is available only when SCSI RAID is used. See the SCSI RAID
controller's documentation to verify that its configuration supports hot-plug SCSI hard drives.
The drive bays in a system with an optional SCSI backplane board provide space for up to six
1-inch hard drives. The hard drives plug into the SCSI backplane board, which is connected to a
controller on the system board or to a RAID controller card. See Figure 7-11 and Figure 7-12.
Figure 7-11. Hot-Plug SCSI Hard Drives Connected to the Integrated SCSI Controller
SCSI hard drives (6) SCSI backplane board
SCSI connector
38-cm (15-inch) SCSI interface cable
111
Installing Drives