Table of Contents
Advertisement
2.4
Water connections
To eliminate possibility of leaking, don't over tighten fittings. Teflon
tape can also be used on all threads.
2.5
Transport (shipping bolts)
Four transport bolts secure the tub during shipment and must be
removed for operation.
Bolts include plastic inserts which must also be removed – don't
unscrew bolts completely, only until bolts and plastic inserts can be
702_58300000143607_ara_en_a
removed together. If bolts are unscrewed completely, inserts will drop
inside washer frames.
Keep transport bolts for future washer moving.
Once bolts have been removed, snap the supplied plastic plugs up
into the bolt holes in the rear of washers.
Page 4 of 42
Advertisement
Table of Contents
Troubleshooting
