Installation And Adjustment - Haier XQSB60-JN User Manual

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Install the inner cover component
1.Open the top lid of the washing machine.
2.Put the inner cover component on the outer tub cover,
aiming the inner cover shaft to the installation hole of the
corresponding outer tub cover shaft groove.
3.Firstly insert the inner cover shaft of one side into the
corresponding outer tub cover shaft groove, then push
the another inner cover shaft into the corresponding
outer tub cover shaft groove. Please install to designated
position to guarantee there are no dropping or abnormal
sound in opening and closing of the inner cover, and the
operation shall be smooth. Do not dismount the inner
cover component after washing.
Install the bottom plate
After opening the package, please lean the washing
machine gently down on soft items (like towel cloth,
blanket, etc.). Install the bottom plate to the bottom
of the machine with four screws by a cross screwdriver,
then lift the machine up gently.
See to the figure:
Push
Front
Bottom plate
4
Outer tub cover
Outer tub cover
shaft groove
Inner cover shaft
Inner cover
Section I enlarging
Back
Screw Soft object