Table of Contents
Advertisement
Quick Links
Safety precautions
Please plug the plug on special 220V AC receptacle.
Be sure to use three phase power receptacle.Ensure
the earthing prong of the power redeptacle is earth-
ed reliably.Use leakage protector if possible.
Do not bend, stretch, twist, bind the power cord by force, or reformit.
Do not press or clamp it with heavy items. If the power cord and power
plug are bad, or the receptacle is loose, be sure to have it replaced by
the technicians of our special shop or our agent,or the after-sales service
department to avoid any risk.Keep the prong of the power plug clean.If
dust is found on the power plug, please wipe it off with dry cloth.
In case the washing machine is installed on ground
with carpet, be careful not to block the ventilation hole
with carpet.
Soft object
Do not put the machine at damp place like the
bathroom. Never wash it with water. Do not
put wet laundries on the control panel coating
Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose, do not use
the plug any more.
In normal usage of the washing machine, the power
plug shall be ready to be pulled or plugged with hang.
Be sure to pull the plug off and close the water faucet
when occurring power failure,delivering the maching,
setting the machine idle or cleaning the machine,Do
not plug or pull the power plug with wet hand.
earth
Do not use water with temperature higher than 50
The ventilation
holes at thebottom
Do not wash water-proof laundry like the raincoat,
bikecovers, down textiles etc. To avoid abnormal
vibrations in spinning and damages to the laundries.
.
Before Using
Before Using
Advertisement
Table of Contents
Related Manuals for Haier XQS52-78
Summary of Contents for Haier XQS52-78
-
Page 1: Safety Precautions
Safety precautions Please plug the plug on special 220V AC receptacle. Be sure to use three phase power receptacle.Ensure the earthing prong of the power redeptacle is earth- ed reliably.Use leakage protector if possible. earth Do not bend, stretch, twist, bind the power cord by force, or reformit. Do not press or clamp it with heavy items. -
Page 2: Before Using
Safety precautions Do not put hand into the rotating tub.It is dangerous even if the rotation speed is slow. Take special care of the children. Keep children away from the washing machine to avoid them climbing on. Do not put any hot or heavy items (such as the kettle with hot water) on the washing machine. -
Page 3: Installation And Adjustment
Installation and adjustment Please install and adjust the machine according to the requirement of the mannual. It is very important to your security and correct operating the machine. Install the inner cover 1.Open the top lid of the washing machine. 2.Put the inner cover component on the outer tub cover, aimingthe inner cover shaft to the installation hole of the correspondingouter tub cover shaft groove. - Page 4 Adjust the Installation position The largest allowable slope of the shank base of the machine is 1 .The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Confirm it's horizontal: Hang the lead line to check if it is horizontal.
-
Page 5: Install The Water Inlet Hose
Install the water inlet hose Confirm the water faucet water faucet, suitable The exit end face of the faucet It is required that the front end shall be longer than 10cm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointer and the water faucet 1.Press the lower end of the lock lever and push down the slider. - Page 6 Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2 Put the nut of the water inlet hose on the valve jointer.
-
Page 7: Preparation Before Washing
1 Preparation before washing Pay attention to followings before washing the laundries Confirm if there's Clear the pocket. special requirement Take out the coins , for the laundries. sand,hairpins etc. a. Check if the laundries are applicable for washing with machine. b. -
Page 8: Put In The Laundries
2 Put in the laundries Reference weight of the laundries: working suit up,down cotton,about 1120g blanket cotton,about 900g pajamas about 200g shirt cotton,about 300g undershirt cotton,about 180g The capacity of washing of the machine refer to the largest weight of the standard laundries under dry condition that can be washed in one time. -
Page 9: Put In The Detergent
3 Put in the detergent Access for detergent and washing powder Access for softerner Detergent box How to use the whitener Fill water to decided level .Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laundries with colour or pattern as they are prone to lose colour. -
Page 10: Use The Operation Buttons
Digital tube During sensing, it displays During operation of programs, it displays theremained time (minute) or remained times of the corresponding procedure XQS52-78 SOAK Rinse button Push the rinse button to set the rinse procedure. During standard and jeans programs,... - Page 11 Child lock function Push and hold the water level button and spin button, then push down the power on/off button. The digitron displays CL . You can continue setting desired washing procedures. After setting, push down the start/pause button. The child lock function is activated. All of the buttons are locked and cannot make selection.
- Page 12 Steps of using the operation buttons and description of the steps Push the "Power on/off " button to switch on the power. Push the "program" button to select suitable automatic program. After switching on the power, the machine will set standard program automatically. To select other automatic program, push the "program"...
- Page 13 After switching on the power, the washing machine will set to common program including"wash, rinse, spin "automatically. To select other procedures, push the "soak", " wash", " rinse" or "spin" button to select the time of soak, wash and spin, and the times of rinse. After switching on the power, if you push one of the button among "wash", "rinse"and"spin", the digitron of the former procedures will turn off automatically.
-
Page 14: Close The Lid
* Total time: including the normal water inlet time and drain time. The total washing time may be influenced by the water inlet pressure and water level. * Spin time: From the moment the intermittent spinning starts to the moment it stops running (the time displayed on spin digitron is from intermittent spinning to the moment before inertia spinning;... -
Page 15: Disposal After Washing
Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Clean the detergent box and set it on the control panel seat. -
Page 16: Trouble-Shooting Answer To Question
Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. -
Page 17: Packing List
Between the upper cushion of the washing machine package and the upper seal of the package carton Eight Inside the accessory bag Inside the accessory bag XQS52-78 220V ~ 50Hz 5.2kg (weight of standard dry cloth) 1/16L 2/20L 3/24L 6/38L...