Haier XQSB60-JN User Manual page 16

b.Steps of using the operation buttons and description
of the steps
No Washing Powder
Disinfect
WASH
FUNCTION SOAK
1.Push the "POWER " button to switch
on the power.
2.Push the "PROGRAM" button to select
suitable automatic program
After switching on the power, the machine will set normal program automatically. To select other
automatic program, push the "program" button till the relative indicator is on. Refer to the "program
button" on Page 11 for the selection.
For instance: select "posthaste"program for laundries with small
quantity and light soil.
In selecting the normal program, the machine
will execute fuzzy program to select water
and wash time according to the cloth and weight
of the laundries. The full procedure is controlled
automatically.
3.Push the "FUNCTION" button to select suitable function.
Push the "FUNCTION" button till the relative indicator is on. Refer to the "program button" on page
10 for the selection.
When"No washing powder" indicator lamp is not on it is the
program for using the washing powder.
4.Push the "SOAK" , "WASH", "RINSE", "SPIN"
button to select suitable procedure.
RINSE WATER LEVEL RESERVE
SPIN
DRY-CLEAN
14
Time remained
(minutes)
FIBRE
NORMAL
COTTON QUICK
SILK
POSTHASTE
DRY-CLEAN JEAN
Reserve
(hours later)
START/PAUSE
PROGRAM
POWER
PROGRAM
Page 11
FIBRE NORMAL
COTTON QUICK
SILK POSTHASTE
JEAN
WASH
SOAK RINSE
POWER
SPIN