Table of Contents
Advertisement
WM6002A
Computerized Full-auto
Washing Machine
Please read this manual carefully before using.
Retain it for future reference.
Please check if the power receptacle has good earthing
condition before using to guarantee your safety.
The manufacturer will not take responsibility for those
risks occurred from not obeying this manual.
TWO DRIVE
TWO 50% CONSUMPTION SAVER
CONTENTS
Names of the parts.............the 2nd cover
Safety precautions .............................................1
Installation and adjustment .........................3
Install the water inlet hose............5
Preparation before washing ...............7
Put in the laundries .............................8
Put in the detergent ............................9
Use the operation buttons ...................10
Close the top lid .................................14
Finish washing ...................................14
Disposal after washing .........................15
Trouble shooting..............................16
Packing list.....................................17
Specification................the back cover
Advertisement
Table of Contents
Related Manuals for Haier WM6002A
Summary of Contents for Haier WM6002A
-
Page 1: Table Of Contents
WM6002A Computerized Full-auto Washing Machine Please read this manual carefully before using. Retain it for future reference. Please check if the power receptacle has good earthing condition before using to guarantee your safety. The manufacturer will not take responsibility for those risks occurred from not obeying this manual. -
Page 2: Before Using
Names of the parts Top lid component Inner cover component Detergent box Control pannel Outer tub cover Lint filter fixing Balance ring Inner tub Lint filter Filter cover Pulsator Attachment block (3 pieces) Cabinet Liquid whitener inlet Fixed leg (3 pieces) Adjustable leg Accessories Inner cover (1 piece) -
Page 3: Safety Precautions
Safety precautions Please plug the plug on special 220-240V AC receptacle. Be sure to use three phase power receptacle.Ensure the earthing prong of the power receptacle is earth- ed reliably.Use leakage protector if possible. earth Do not bend, stretch, twist, bind the power cord by force, or reformit. Do not press or clamp it with heavy items. - Page 4 Safety precautions Do not put hand into the rotating tub.It is dangerous even if the rotation speed is slow. Take special care of the children. Keep children away from the washing machine to avoid them climbing on. Do not put any hot or heavy items (such as the kettle with hot water) on the washing machine.
-
Page 5: Installation And Adjustment
Installation and adjustment Please install and adjust the machine according to the requirement of the mannual. It is very important to your security and correct operating the machine. Install the inner cover and lint filter 1.Open the top lid of the washing machine. 2.Put the inner cover component on the outer tub cover, aiming the inner cover shaft to the installation hole of the corresponding outer tub cover shaft groove. -
Page 6: How To Change The Direction Of The Drain Hose
How to change the direction of the drain hose 1. Dismount the back cover of the washing machine. 2. Put down the drain hose. Take off the drain hose frame. As indicated in Figure 1, put the drain hose into the cabinet. Then put one hand into the cabinet to nip the claw of the drain hose bushing to release the claw from original position. -
Page 7: Install The Water Inlet Hose
Install the water inlet hose Confirm the water faucet water faucet, suitable The exit end face of the faucet It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointer and the water faucet Use the new water inlet hose provided with the machine to connect to the water faucet.Old hose sets should not be reused. - Page 8 Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2 Put the nut of the water inlet hose on the valve jointer.
-
Page 9: Using Process
1 Preparation before washing Pay attention to followings before washing the laundries Confirm if there's Clear the pocket. special requirement Take out the coins , for the laundries. sand,hairpins etc. a. Check if the laundries are applicable for washing with machine. b. -
Page 10: Put In The Laundries
2 Put in the laundries Reference weight of the laundries: working suit up,down cotton,about 1120g blanket cotton,about 900g pajamas about 200g shirt cotton,about 300g undershirt cotton,about 180g The capacity of washing of the machine refer to the largest weight of the standard laundries under dry condition that can be washed in one time. -
Page 11: Put In The Detergent
3 Put in the detergent Access for detergent and washing powder Access for softerner Detergent box How to use the whitener Fill water to decided level .Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laundries with colour or pattern as they are prone to lose colour. -
Page 12: Use The Operation Buttons
4 Use the operation buttons Description of the function of buttons Mode and meaning of the indicators Flashing: indicate the running program On: indicate the program about to run, or indicate the selected mode •• •• button Push the soak button to set the soak procedure. During normal and jean programs, push the soak button to set different soak time (10, 20, 30, 40 minutes) During chemical fibre and cotton programs, push the... - Page 13 function CHILD LOCK Push and hold the water level button and spin button, then push down the power on/off button. The digitron displays CL . You can continue setting desired washing procedures. After setting, push down the start/pause button. The child lock function is activated. All of the buttons are locked and cannot make selection.
- Page 14 Steps of using the operation buttons and description of the steps Push the "POWER ON/OFF " button to switch on the power. Push the "PROGRAM " button to select suitable automatic program. After switching on the power, the machine will set standard program automatically. To select other automatic program, push the "PROGRAM"...
- Page 15 After switching on the power, the washing machine will set to common program including"wash, rinse, spin "automatically. To select other procedures, push the "SOAK", " WASH", " RINSE" or "SPIN" button to select the time of soak, wash and spin, and the times of rinse. After switching on the power, if you push one of the button among "WASH", "RINSE"and"SPIN", the digitron of the former proce- dures will turn off automatically.
-
Page 16: Close The Top Lid
Push the "START/PAUSE"button 5 Close the lid As the top lid opened ,the Washer will automatically give an alarm and stop running , exclusively during supplying water and rinsing. Page the washing will be finished after 18 hours. -
Page 17: Disposal After Washing
Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Clean the detergent box and set it on the control panel seat. -
Page 18: Trouble Shooting
Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. -
Page 19: Packing List
Packing list Name User's manual Lint filter Components of the water inlet hose Bottom plate Tapping screws ST4x16-A Inner cover component Computerized Automatic washing machine Quantity Storage position Inside the document bag Inside the document bag Inside the accessory bag Between the upper cushion of the washing machine package and the upper seal of the package carton... -
Page 20: Specification
Water level/Water quantity (about) Max water consumption Injection pressure Rated washing power Rated spinning power Weight About Dimension WM6002A 220-240V~ 50Hz 6.0kg (weight of standard dry cloth) 1/16L 2/20L 3/24L 4/28L 5/32L 6/38L 7/42L 8/45L 9/47L 10/50L About 75L(High water level; Standard program) 0.03MPa~0.78MPa...