Table of Contents
Advertisement
Reserve/remain time indicator digitron
During sensing, it displays --
During reserve procedure, it displays the remained reserve time (in
hours)
During operation of programs, it displays the remained time (minutes).
If the remained time exceeds99 minutes, it adopts A at tens place to
represent 100 minutes, b to represent 110 minutes. For instance, A3
represents103 minutes.
In case of abnormal phenomenon, it displays
the abnormal symbol (see to Page 18)
SPIN
WATER LEVEL RESERVE
Spin button
The washing machine can detect the laundries
Push the spin button to
automatically. After detection, it will set the water
level to suitable value among 4, 6, 8,and A
set the spin procedure.
automatically.
During normal, jean
You can also set water level by yourself. After the
machine is started, it will not set water level
programs, push the spin
automatically. You shall push the start/pause
button to set different spin
button to make new setting.
If there's water inside the tub, the machine cannot
time (from 0 to 9 minutes)
detect the laundries and will display water level 6 .
During cotton , fibre and
If wet laundries are put in, it may display water level
10 . You must set suitable water level by yourself.
silk programs, push the
If posthaste program is selected, it will display
spin button to select spin
water level 3 . When water level 2 is reached in
procedure, but the spin
water filling, it will perform washing while filling
water. When water level 3 is reached, it
time cannot change.
will change to normal washing.
During quick ,posthaste
During operation of wash and rinse program, you
can push down the water level button to add water.
dry-clean programs, push
When you release the button, or it reaches the
the spin button, the
overflow water level, the machine will stop adding
water.
machine have no reaction.
The water level decided may be different from actual
value because of the different moisture level of the
laundries.
Page18
Time remained
(minutes)
FIBRE
NORMAL
QUICK
COTTON
SILK
POSTHASTE
DRY-CLEAN
JEAN
Reserve
(hours later)
START/PAUSE
PROGRAM
11
After the power is switched on, push it to
start the machine
During working, push it to pause working.
During pause, push it to resume working.
Power On/Off button
Push the POWER button to switch
on the power.
When the power is on, push it
again to switch off the power.
Push the POWER button to switch
on the power.
If the start/pause button is not
pushed, the washing machine will
automatically switch off the power
after 5 minutes.
POWER
Following automatic programs are available for selection
Applicable situation
Program
Common washing
Normal
Fast efficient washing for common laundries
Quick
Super quick wash of the laundry under 1
Posthaste
kg with light soil
Washing the relatively big and thick laundries
Jean
Washing the fibre laundries
Fibre
Washing the cotton textiles
Cotton
Washing the silk textiles
Silk
Washing for laundries requiring dry-clean
(see to dry-clean description and P12 of
Dry-clean
the points of attention for details)
Push this button can select washing closing time
range of choice for 2 ~ 24 hours.
After reservation starts up after hold "RESERVE "
button by hand can display reserving status.
Advertisement
Table of Contents
