Related Manuals for Haier XQS60-78H
Summary of Contents for Haier XQS60-78H
- Page 1 Fuzzy Computerized Automatic Washing Machine This manual is for XQS60-78H Please read this manual carefully before using. Retain it for future reference. User's manual User's manual 0030804888A...
-
Page 2: Table Of Contents
CONTENTS Names of the parts...1 Safety precautions ...2 Installation and adjustment ...4 Install the water inlet hose...6 Preparation before washing ...8 Put in the laundries ...9 Put in the detergent ...9 Use the operation buttons ...10 Close the top lid ...14 Finish washing ...14 Disposal after washing ...15 Trouble shooting Answer to question...16... -
Page 3: Names Of The Parts
Names of the parts Top lid handle Round cover Attachment block (2 pieces) Pulsator Water inlet valve Water absorption cushion Handle Power cord Drain hose Back cover Adjustable leg film Meaning and description of the symbols Warning sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. -
Page 4: Safety Precautions
Safety precautions Please plug the plug on special 220V AC receptacle. Be sure to use single-phase three pins receptacle. Ensure the earthing prong of the power receptacle is earthed reliably. Use leakage protector if possible. Do not bend, stretch, twist, bind the power cord by force, or reform it. Do not press or clamp it with heavy items. - Page 5 Safety precautions Do not put hand into the rotating tub. It is dangerous even if the rotation speed is slow. Take special care of the children. Keep children away from the washing machine to avoid them climbing on. Do not put any hot or heavy items (such as the kettle with hot water) on the washing machine.
-
Page 6: Installation And Adjustment
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the inner cover component 1.Open the top lid of the washing machine. 2.Put the inner cover component on the outer tub cover, aiming the inner cover shaft to the installation hole of the corresponding outer tub cover shaft groove. - Page 7 Adjust the Installation position The largest allowable slope of the shank base of the machine is 1 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Confirm it's horizontal: Hang the lead line to check if it is horizontal.
-
Page 8: Install The Water Inlet Hose
Install the water inlet hose Confirm the water faucet water faucet, suitable The exit end face of the faucet It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointer and the water faucet 1.Press the lower end of the lock lever and push down the slider. -
Page 9: Connection Between The Water Inlet Hose And The Washer
Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2 Put the nut of the water inlet hose on the valve jointer. -
Page 10: Preparation Before Washing
1 Preparation before washing Pay attention to followings before washing the laundries Confirm if there's Clear the pocket. special requirement Take out the coins , for the laundries. sand,hairpins etc. a. Check if the laundries are applicable for washing with machine. b. -
Page 11: Put In The Laundries
2 Put in the laundries 3 Put in the detergent Access for detergent and washing powder Access for softener Detergent box How to use the whitener Fill water to decided level .Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laundries with colour or pattern as they are prone to lose colour. -
Page 12: Use The Operation Buttons
4 Use the operation buttons Description of the function of buttons Mode and meaning of the indicators Flashing: indicate the running program On: indicate the program about to run, or indicate the selected mode SOAK button WASH button Push the WASH button to set Push the SOAK button to set the wash procedure. - Page 13 CHILD LOCK FUNCTION Push and hold the WATER LEVEL button and SPIN button, then push down the POWER ON/OFF button. The digitron displays CL . You can continue setting desired washing procedures. After setting, push down the START/PAUSE button. The child lock function is activated. All of the buttons are locked and cannot make selection.
- Page 14 Steps of using the operation buttons and description of the steps 1 Push the "POWER ON/OFF " button to switch on the power. 2 Push the "PROGRAM" button to select suitable automatic program. After switching on the power, the machine will set "STANDARD " program automatically. To select other automatic program, push the "PROGRAM"...
- Page 15 After switching on the power, the washing machine will set to common program including"wash, rinse,spin "automatically. To se lect other procedures, push the "SOAK", " WASH", " RINSE" or "SPIN" button to select the time of soak, wash and spin, and the times of rinse. After switching on the power, if you push one of the button among "WASH", "RINSE"and"SPIN", the digitron of the former procedures will turn off automatically.
-
Page 16: Close The Top Lid
6.Push the "START/PAUSE " button 5 Close the lop lid As the top lid opened, the Washer will automatically give an alarm and stop running, exclusively during supplying water and rinsing. RESERVE/CALEFACTION "... -
Page 17: Disposal After Washing
7.Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Clean the detergent box and set it on the control panel seat. -
Page 18: Trouble Shooting Answer To Question
Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. -
Page 19: Packing List Specification
Packing list Name Quantity User's manual Warranty manual Components of the water inlet hose The end connecting to the washing machine Jointer connecting the water inlet hose and the water faucet The end connecting to the water inlet hose jointer Water inlet hose (1 piece) Water inlet hose joint (1 piece) Bottom plate...