Haier XQS50-28 User Manual
Haier XQS50-28 User Manual

Haier XQS50-28 User Manual

Computerized automatic washing machine
Hide thumbs Also See for XQS50-28:

Advertisement

Quick Links

Specification
Model
XQS50-28
Computerized automatic washing machine
Rated voltage frequency
Rated washing / spinning capacity
1/16L 2/20L 3/24L 4/28L 5/32L
Water level/Water quantity (about)
6/38L 7/42L 8/45L 9/47L 10/50L
Max water consumption
About 100L(High water level; Standard program)
Injection pressure
Rated washing power
Rated spinning power
Weight About
Dimension
220V ~
50Hz
5.0kg (weight of standard dry cloth)
0.03Mpa~0.78Mpa
380W
260W
36kg
L 520 mm W 520 mm H 908 mm
XQS50-28
Computerized automatic
Washing Machine
Please read this manual carefully bifore using.
Retain it for future reference.
Please check if the power receptacle has good earthing
condition before using to guarantee your safety.
The manufacturer will not take responsibility for those
risks occurred from not obeying this manual.
CONTENTS
Names of the parts.............the 2nd cover
Safety precautions .............................................1
Installation and adjustment .........................3
Preparation
before washing ...............7
Put
in the laundries .............................8
Put
in the detergent ............................9
Use the operation buttons ...................10
Close the top lid .................................14
Finish washing ...................................14
Disposal after washing .........................15
Trouble shooting..............................16
Packing list.....................................17
Specification................the back cover

Advertisement

Table of Contents
loading

Summary of Contents for Haier XQS50-28

  • Page 1: Table Of Contents

    Specification Model XQS50-28 Computerized automatic washing machine Rated voltage frequency 220V ~ 50Hz Rated washing / spinning capacity 5.0kg (weight of standard dry cloth) 1/16L 2/20L 3/24L 4/28L 5/32L Water level/Water quantity (about) 6/38L 7/42L 8/45L 9/47L 10/50L Max water consumption About 100L(High water level;...
  • Page 2: Before Using

    Names of the parts Water inlet valve Top lid component Water absorption Inner cover component cushion Detergent box Power cord Control pannel Outer tub cover Lint filter fixing Balance ring Inner tub Lint filter Filter cover Pulsater Attachment block (3 pieces) Cabinet Liquid whitener inlet Fixed leg...
  • Page 3: Safety Precautions

    Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company.
  • Page 4 Safety precautions Do not put hand into the rotating tub.It is dangerous Do not decompose, repair or alter the machine by even if the rotation speed is slow. Take special care of yourself. the children. Keep children away from the washing machine to avoid them climbing on.
  • Page 5: Installation And Adjustment

    Push the "Start/Pause" button 6 Finish washing 5 Close the lid As the top lid opened ,the Washer will automatically give an alarm After finishing wash and stop running , then drain automatically after 15s ,exclusively during supplying water and rinsing.
  • Page 6 Useage the drain hose Before using , hang up the drain hose on suitable location. Do not put down the drain hose on the ground. Confirm the end of drain hose is higher than the level of tub . If not the siphon will being . How to change the direction of the drain hose 1.
  • Page 7: Install The Water Inlet Hose

    Steps of using the operation buttons and description of the steps RESERVE WATER LEVEL Push the "Power on/off " button to switch on the power. Push the "program" button to select suitable automatic program. After switching on the power, the machine will set standard program automatically. To select other automatic program, push the "program"...
  • Page 8 Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2 Put the nut of the water inlet hose on the valve jointer.
  • Page 9: Before Washing

    Description of the function of buttons Mode and meaning of the indicators Flashing: indicate the running program On: indicate the program about to run, or indicate the selected mode WASH Wash button Spin button Push the wash button to set the wash procedure. During standard and jeans programs, push the wash Push the spin button to set the spin procedure.
  • Page 10: In The Laundries

    2 Put in the laundries The capacity of washing of the machine refer to the largest weight of the standard laundries under dry condition that can be washed in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity.

This manual is also suitable for:

Hwm50-28hk

Table of Contents