Appendix A - Connectors - Samsung STP-103S Operator's Manual

GS v 0 xL xH yL yH dl...dk
[Name] Print raster bit image
[Format] ASCII GS v
Hex 1D 76
Decimal 29 118
0 ≤ m ≤ 3 , 48 ≤ m ≤ 51
[Range]
0≤ xL ≤ 255 , 0 ≤ xH ≤ 255 , 0 ≤ yL ≤ 255
0 ≤ d ≤ 255
k = (xL+xH×256) × (yL+yH×256) (k=0)
[Description] Selects raster bit-image mode.
The value of m selects the mode, as follows :
m Mode Vertical dot density
0,48 Normal
1,49 Double-width
2,50 Double-height
3,51 Quadruple
• xL, xH, selects the number of data bits(xL+xH×256)in the
horizontal direction for the bit image.
• yL, yH, selects the number of data bits (yL+yH×256)in the
vertical direction for the bit image.
GS w n
[Name] Set bar code width
[Format] ASCII GS w
Hex 1D 77
Decimal 29 119
[Range] 2 ≤n ≤6
[Description] Set the horizontal size of the bar code.
n specifies the bar code width as follows:
Module width (mm) for
N
Thin element width
Multi-level Bar Code
2 0.282
3 0.423
4 0.564
5 0.706
6 0.847
• Multi-level bar codes are as follows:
UPC-A, UPC-E, JAN13, CODE93, CODE128
• Bi-level bar codes are as follows: CODE39, ITF, CODABAR
[Default] n = 3
0 m xL xH yL yH dl...dk
30 m xL xH yL yH dl...dk
48 m xL xH yL yH dl...dk
Horizontal dot density
200dpi 200dpi
200dpi 100dpi
100dpi 200dpi
100dpi 100dpi
n
n
n
Bi-level Bar Code
Thick element width
(mm) (mm)
0.282 0.706
0.423 1.129
0.564 1.411
0.706 1.834
0.847 2.258
50
APPENDIX A : CONNECTORS
Serial Interface Connector (STP-103S)
PRINTER
20 TXD (O) ---------------------
19 RXD (I) ---------------------
21 CTS (I) ---------------------
22~25 GND ---------------------
18 RTS (O) ---------------------
25 PINE MALE
Parallel Interface Connector (STP-103P)
PRINTER
1 /STROBE (I/O)
2 DATA0 (I/O)
3 DATA1 (I/O)
4 DATA2 (I/O)
5 DATA3 (I/O)
6 DATA4 (I/O)
7 DATA5 (I/O)
8 DATA6 (I/O)
9 DATA7 (I/O)
10 /ACK (I)
11 BUSY (I)
12 PE (I)
13 SLCT
15 /ERROR (I)
16~21 N.C
22~25 GND
25 PINE FEMALE
HOST
2 RXD (I)
3 TXD (O)
7 RTS (O)
5 GND
8 CTS (I)
4 DTR (O)
CONNECT
6 DSR (I)
9 PINE MALE
HOST
1 /STROBE (I/O)
2 DATA0 (I/O)
3 DATA1 (I/O)
4 DATA2 (I/O)
5 DATA3 (I/O)
6 DATA4 (I/O)
7 DATA5 (I/O)
8 DATA6 (I/O)
9 DATA7 (I/O)
10 /ACK (I)
11 BUSY (I)
12 PE (I)
13 SLCT
15 /ERROR (I)
16 /INIT (O)
18~25 GND
25 PINE FEMALE
51