Samsung STP-103S Operator's Manual page 23

● When the LSB of m = 1:
After waiting for the period specified by t, the LED indicator
blinks and the printer waits for the PAPER FEED button to be
pressed. After the button is pressed, the printer executes the
macro once, The printer repeats the operation r times.
GS a n
[Name] Enabled/disable Automatic Status Back(ASB)
[Format] ASCII GS a
Hex 1D 61
Decimal 29 97
[Range] 0 ( n ( 255
[Description] Enables or disables ASB and specifies the status items to include,
using n as follows:
Bit Off/On Hex Decimal Status for ASB
0 Off 00 0 Not used.
1 Off 00 0 On-line/off-line status disabled
On 02 2 On-line/off-line status enabled
2 Off 00 0 Error status disabled
On 04 4 Error status enabled
3 Off 00 0 Paper roll sensor status disabled
On 08 8 Paper roll sensor status enabled
4~7 - - - Undefined
First byte (printer information)
Bit Off/On Hex Decimal Status for ASB
0 Off 00 0 Not used. Fixed to off
1 Off 00 0 Not used. Fixed to off
2 Off 00 0 Not used.
3 Off 00 0 On-line
On 08 8 Off-line
4 On 10 16 Not used. Fixed to on
5 Off 00 0 Cover is closed
On 20 32 Cover is open
6 Off 00 0 Paper is not being fed by using the paper
feed button
On 40 64 Paper is being fed by using the paper feed
button
7 Off 00 0 Not used. Fixed to off
n
n
n
44
Second byte (printer information)
Bit Off/On Hex Decimal Status for ASB
0 - - - Undefined
1 - - - Undefined
2 - - - Undefined
3 Off 00 0 Not used. Fixed to off
4 Off 00 0 Not used. Fixed to off
5 Off 00 0 Not used. Fixed to off
6 Off 00 0 Not used. Fixed to off
7 Off 00 0 Not used. Fixed to off
Third bytes (paper sensor information
Bit Off/On Hex Decimal Status for ASB
0,1 Off, Off 00 0 Paper roll near-end sensor: paper
adequate
On, On 03 3 Paper roll near-end sensor: paper near end
2,3 Off, Off 00 0 Paper roll end sensor: paper present
On, On 0C 12 Paper roll end sensor: paper not present
4 Off 00 0 Not used. Fixed to off
5,6 - - - Undefined
7 Off 00 0 Not used. Fixed to off
Fourth byte (paper sensor information)
Bit Off/on Hex Decimal Status for ASB
0~3 - - - Undefined
4 off 00 0 Not used. Fixed to off
5,6 - - - Undefined
7 Off 00 0 Not used. Fixed to off
[Default] n=0
GS b n
[Name] Turns smoothing mode on/off
[Format] ASCII GS b
Hex 1D 62
Decimal 29 98
0 ≤ n ≤255
[Range]
[Description] Turns smoothing mode on or off.
● When the LSB of n is 0, smoothing mode is turned off.
● When the LSB of n is 1, smoothing mode is turned on.
n
n
n
45