Samsung STP-102S Operator's Manual

Samsung STP-102S STP-102P user Manual Samsung STP-102S STP-102P user Manual Samsung STP-102S STP-102P user Manual Samsung STP-102S STP-102P user Manual
STP-102S / STP-102P
Operator's Manual
ELECTRO- MECHANICS
Warning - U.S
DATE: July. 2001
This equipment has been tested and found to comply with the limits for a Class A
MANUAL REVISION 2.0
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interface when the equipment is
operated in a commercial environment. This equipment generates uses, and can
radiate radio frequency energy and, if not installed and uses in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Notice - Canada
This Apparatus complies with class "A" limits for radio interference as specified in
the Canadian department of communications radio interference regulations.
Introduction
The STP-102S and STP-102P Roll Printer is designed for use with electric instruments
such as system ECR, POS, banking equipment peripheral equipment, etc.
The main features of the printer are as follows:
Please be sure to read the instruction in this manual carefully before using your
new STP-102S and STP-102P.
TEL : 82-31-210-5620
FAX : 82-31-210-5589
1. High speed printing
2. Low noise thermal printing.
3. RS-232 serial interface (STP-102S). Parallel interface (STP-102P).
4. The data buffer allows the unit to receive print data even during printing.
5. Different print densities can be selected by DIP switches.
NOTE
The socket-outlet shall be near the equipment and it shall be easy
accessible.