Setting Guide 7.1.2 Rear view ADF connector network port extension telephone socket (EXT) power receptacle telephone line socket (LINE) power switch parallel port output support USB port Service Manual Samsung Electronics...
Scroll buttons: Scroll through the options avail- the copy size, and the number of copies. able in the selected menu, and increase or Start: Starts a job. decrease values. Service Manual Samsung Electronics...
The lifespan of the toner cartridge is reached, and you selected Continue at the Toner Exhausted prompt. The toner cartridge is low. Order a new toner cartridge. You can temporarily improve print quality by redistributing the toner. Service Manual Samsung Electronics...
To access a printer driver help screen, click Help from the printer properties dialog box. Samsung website If you have Internet access, you can get help, support, printer drivers, manuals, and order information from the Samsung website, www.samsungprinter.com. Service Manual Samsung Electronics...
The control panel provides access to various menus to set up the machine or use the machine's functions. These menus can be accessed by pressing Menu. Refer to the following diagram. Menus available in Fax, Copy, or Scan mode vary. Service Manual Samsung Electronics...
2. Press OK when Machine Setup appears. 3. Press the Scroll buttons until Clock Mode appears and press OK. 4. Press the Scroll buttons to select the other mode and press OK. 5. Press Stop/Clear to return to Standby mode. Service Manual Samsung Electronics...
1. Press On Hook Dial. A dial tone sounds from the speaker. 2. Press the Scroll buttons until you hear the volume you want. 3. Press On Hook Dial to save the change and return to Standby mode. Service Manual Samsung Electronics...
2. Press the international button on the keyboard until the desired character you want displays. Example: To enter Â, press A key first. And then, press the international button three times until  character shows. Refer to the table below for international character map. Service Manual Samsung Electronics...
You can insert a pause while you are setting up one-touch dial numbers or speed dial numbers. To insert a pause, press Redial/Pause at the appropriate place while entering the telephone number. A - appears on the display at the corresponding location. Service Manual 7-10 Samsung Electronics...
3. Press the Scroll buttons until Job Timeout appears and press OK. 4. Press the Scroll buttons until the time setting you want appears and press OK. 5. Press Stop/Clear to return to Standby mode. Service Manual 7-11 Samsung Electronics...
7.5 Network setup 7.5.1 Supported operating systems The following table shows the network environments supported by the machine: IPX/SPX: Internet Packet eXchange/Sequenced Packet eXchange TCP/IP: Transmission Control Protocol/Internet Protocol DHCP: Dynamic Host Configuration Protocol BOOTP: Bootstrap Protocol Service Manual 7-12 Samsung Electronics...
1. Press Menu until Network appears on the bottom line of the display. 2. Press OK when TCP/IP appears. 3. Press the Scroll buttons until DHCP or BOOTP appears and press OK. 4. Press Stop/Clear to return to Standby mode. Service Manual 7-13 Samsung Electronics...
2. Press the Scroll buttons until Ethernet Speed appears and press OK. 3. Press the Scroll buttons until the speed you want appears and press OK. 4. Press Stop/Clear to return to Standby mode. Restart your machine to apply new settings. Service Manual 7-14 Samsung Electronics...
1. Press Menu until Network appears on the bottom line of the display and press OK. 2. Press the Scroll buttons until Network Info. appears and press OK. 3. Press OK when Yes appears. The Network Configuration page prints out. Service Manual 7-15 Samsung Electronics...