Table of Contents
Advertisement
Glossary
Station Programming
Programming via the proprietary telephone.
Subscriber
A person who has an assigned mailbox.
System Administration
System programming can be performed via 2 ways: (1) Locally (personal computer
connected directly to the RS-232C port of the VPS), or (2) remotely (personal
computer connected via the telephone network and the internal modem card [KX-
TVS300 only] of the VPS).
Note: Local programming and remote programming are mutually exclusive.
System Administrator
Unlike the Message Manager and the System Manager, who use a telephone to
perform their duties, the System Administrator uses a personal computer to
program the VPS. The System Administrator's handbook is the Installation Manual.
System External Message Delivery Duration Time
The maximum time allowed for an external message that is to be delivered by the
VPS, specified by the System Administrator.
System Group Distribution List
The VPS can maintain up to 20 distribution lists, each containing a maximum of 20
mailboxes. Each list is referenced by a System Group Distribution List number and
is assigned via system administration. A recording into a System Group Distribution
List number will go into the mailboxes of all group members.
System Manager
(Mailbox 99, 999, 9999, or 99999) The person who can perform very basic and
limited system programming using a telephone. She can create/delete mailboxes,
clear subscriber passwords when they are forgotten, set Class of Service
parameters, set the System Clock, and generate System Reports.
System Report
The System Administrator or System Manager can generate 8 System Reports to
monitor the VPS operating status as required.
TIME
One of the utility commands that is used to confirm or set the time and date of the
VPS.
64
Subscriber's Guide
Advertisement
Table of Contents
