Vent System Identification; Special Vent Systems - Empire Comfort Systems MILLIVOLT DVD32FP30N-3 Installation Instructions Manual

Begin the vent system installation by selecting the type of venting
to be installed and the path that it will take. Verify that clearances
are met throughout the path of the venting system. Determine if the
fireplace is to be vented out the top or out the rear.
NOTICE: Some fireplaces cannot be vented out the rear of the fireplace.
Determine how the vent system will be terminated out the side of
the house or through the roof. Verify clearances for the termination.
When selecting a vent system for use with the fireplace, refer to the
"Special Vent Systems" section in this manual to determine what
systems are acceptable.
The following vent systems are acceptable for use with the DVD (32, 36, 42, 48) series fireplaces:
• Duravent® Pro 4" - 6 ⅝"
• American Metal Products 4" - 6 ⅝"
• Selkirk Direct-Temp® 4" - 6 ⅝"
• MetalFab SureSeal® 4" - 6 ⅝"
• BDM 4"
• Security Secure Vent® 4" - 6 ⅝"
Page 8

VeNt sYsteM iDeNtiFicatioN

Figure 1

special VeNt sYsteMs

Check all clearances and venting components. Identify if any
problems existing in the vent system. Use Figure 22, page 18 for
top venting or Figure 32, page 22 for rear venting to eliminate issues
after installation. Check pipe diameter on vent system and fireplace
to verify the size is the same.
NOTICE: All outer connection joints must be sealed with
aluminum tape, screws or silicone sealant rated above
300°F/149°C. The inner flue joints do not require any sealant.
Special Venting Components (Duravent)
See Empire Comfort Systems Retail Price List for
Duravent part numbers and pricing.
Special DV Vent Kits
Available from Empire Comfort Systems, Inc. dealers
DVVK-4FV Vertical Flex Vent Kit 4" x 7"
Direct-Vent Fireplace Vent Kit - Vertical,
DVVK-4VP
Includes SD-991, SD-953, and SD-943
Direct-Vent Fireplace Vent Kit for Top Vent,
DVVK-4TP Thru-the-wall, 8 to 11 inch wall thickness,
Includes SD-911, SD-985, SD-990 and SD-942
Direct-Vent Fireplace Vent Kit for Rear Vent, 5
DVVK-4RP to 7 inch wall thickness, (standard thru-the-wall
venting) Includes SD-908, SD-985 and SD-942
Direct-Vent Fireplace Vent Kit for Rear Vent,
Thru-the wall, 5 to 7 inch wall thickness,
DVVK-4RE
(standard thru-the-wall venting) Includes SD-
908, SD985 and SD-942
Direct-Vent Fireplace Vent Kit for Top Vent,
DVVK-4TSP Thru-the-wall, 5 to 7 inch wall thickness,
Includes SD-908, SD-985, SD-990 and SD-942
VIB6A Vertical Inlet Baffle Kit for 6 5/8" diameter.
VIB7A Vertical Inlet Baffle Kit for 7" diameter.
• Excel DV 4" - 6 ⅝"
• Olympia VENTIS®
• Empire Horizontal Round Termination Kit
DVVK-4REVS
Empire Flexvent Kits:
• DVVK-4F, DVVK-4FV, DVVK-4FRE, DVVK-4FREVS
DVVK-4RE,
38713-5-1019