Troubleshooting - Ryobi P20019 Operator's Manual

STORING THE TRIMMER
 Remove the battery pack from the grass trimmer before
storing.
 Clean all foreign material from the trimmer.
 Store it in a place that is inaccessible to children.
 Keep away from corrosive agents such as garden chemi-
cals and de-icing salts.
PROBLEM
Motor fails to start when switch
trigger is depressed.
Line will not advance
This product has a Three-year Limited Warranty for personal, family, or
household use (90 days for business or commercial use). For warranty details,
visit www.ryobitools.com or call (toll free) 1-800-525-2579.
MAINTENANCE

TROUBLESHOOTING

POSSIBLE CAUSE
Battery is not secure.
Battery is not charged.
Battery is hot.
Line is welded to itself.
Not enough line on spool.
Line is worn too short.
Line is tangled on spool.
For any questions about operating or maintaining your product,
Your product has been fully tested prior to shipment
to ensure your complete satisfaction.
11 — English
REPLACEMENT PARTS
Replacement Line:
0.080 in. Twisted ...........................................AC0580PCL
0.095 in. Twisted ................................................AC04149
SOLUTION
To secure the battery pack, make sure the latch on the
bottom of the battery pack is snapped into place.
Charge the battery pack according to the instructions
included with your model.
When battery pack reaches cooled temperature, the
trimmer will resume operation.
Lubricate with silicone spray.
Install more line. Refer to Line Replacement earlier in
this manual.
Pull lines while alternately pressing down on and releas-
ing bump knob. Refer to Line Replacement earlier in
this manual.
Remove line from spool and rewind. Refer to Line
Replacement earlier in this manual.
CALL US FIRST
call the Ryobi Help Line!