Troubleshooting - Ryobi RY402013 Operator's Manual

PROBLEM
Line will not advance when
using the auto-feed head
Grass wraps around boom
housing and string head
Motor fails to start when switch
trigger is depressed
This product has a Five-year Limited Warranty for personal,
family, or household use (90 days for business or commercial use).

TROUBLESHOOTING

POSSIBLE CAUSE
Line is welded to itself.
Not enough line on spool.
Line is worn too short.
Line is tangled on spool.
Cutting tall grass at ground
level.
Battery is not secure.
Battery is not charged.
Shaft not connected com-
pletely
For any questions about operating or maintaining your product,
Your product has been fully tested prior to shipment
For warranty details, visit www.ryobitools.com
or call (toll free) 1-800-525-2579.
Lubricate with silicone spray.
Install more line. Refer to Spool Replacement earlier
in this manual.
Pull line while pressing button.
Remove and replace the spool. Refer to Spool Replace-
ment earlier in this manual.
Cut tall grass from the top down to prevent wrapping.
To secure the battery pack, make sure the latch on the
bottom of the battery pack is snapped into place.
Charge the battery pack according to the instructions
included with your model.
Make sure the lower shaft is securely seated in the
coupler on the upper shaft.
CALL US FIRST
call the Ryobi Help Line!
to ensure your complete satisfaction.
11 — English
SOLUTION