Disassemble The Lcd Module; Remove The Hinge Cover; Remove The Hinges - Lenovo ThinkBook 13x Gen 2 Hardware Maintenance Manual

Go to
https://support.lenovo.com/partslookup
part:
Upper case (with keyboard)

Disassemble the LCD module

The LCD module as a whole is not an FRU. Instead, it contains FRUs as its components. Before
disassembling the LCD module, make sure it has been detached from the upper case.

Remove the hinge cover

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 37
Step 1. Remove the hinge cover.
Figure 28. Remove the hinge cover.
Go to
https://support.lenovo.com/partslookup
part:
Hinge cover

Remove the hinges

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 37
"Remove the hinge cover" on page 44
Step 1. Remove six screws and then remove the hinges.
44
Hardware Maintenance Manual
to look up the Lenovo part number of the following replacement
to look up the Lenovo part number of the following replacement