Remove The Upper Case (With Keyboard) - Lenovo ThinkBook 13x Gen 2 Hardware Maintenance Manual

Figure 26. Remove one screw and then remove the fingerprint board and cable
Screw specifications
M2.0 x L2.0
Step 2. Detach the fingerprint board cable connector and then remove the fingerprint board cable.
Figure 27. Remove the fingerprint board cable
Go to https://support.lenovo.com/partslookup
part:
Fingerprint board
Fingerprint board cable

Remove the upper case (with keyboard)

Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 30
"Remove the battery pack" on page 31
"Remove the solid-state drive (SSD), thermal pad and bracket" on page 32
"Remove the speakers" on page 34
"Remove the fan" on page 34
"Remove the heat sink" on page 35
"Remove the touchpad and the touchpad cable" on page 36
"Remove the LCD module" on page 37
"Remove the system board, USB board and cables" on page 39
"Remove the fingerprint board and cable" on page 42
Number of screws
1
to look up the Lenovo part number of the following replacement
.
Chapter 4 Removing a FRU or CRU
43