Lcd Self Test - Lenovo ThinkBook 13x Gen 2 Hardware Maintenance Manual

Figure 18. Disconnect the cables
Step 4. Rotate the LCD module to an angle of more than 90 degrees and place the computer on a flat
surface as shown. Remove six screws and then remove the LCD module.
Figure 19. Remove the LCD module
Screw specifications
M2.5 x L3.5
M2.0 x L4.0
Go to https://support.lenovo.com/partslookup
part:
LCD module

LCD Self Test

When you turn on the computer and the LCD goes black, run LCD Self Test to help you determine whether
the LCD functions normally.
38
Hardware Maintenance Manual
Number of screws
4
2
to look up the Lenovo part number of the following replacement