Remove The Battery Pack; Screw Specifications Number Of Screws - Lenovo ThinkBook 13x Gen 2 Hardware Maintenance Manual

Screw specifications
M2.0 x L4.0
Step 3. Pry up the latches and then remove the lower case.
a. For models without wireless charging connector: Remove the lower case directly.
Figure 4. Pry up the latches and remove the lower case
b. For models with wireless charging connector: Lift the right side of the lower case slightly,
detach the wireless charging cable connector and then remove the lower case.
Attention: Do not use too much force when lift the lower case, otherwise the wireless
charging cable or connector may be damaged.
Figure 5. Detach the wireless charging cable connector
Go to
https://support.lenovo.com/partslookup
part:
Lower case

Remove the battery pack

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 30
Step 1. Disconnect the battery pack cable from the system board.
Number of screws
9
to look up the Lenovo part number of the following replacement
.
Chapter 4 Removing a FRU or CRU
31