Table of Contents
Advertisement
COMMISSIONING
COMMISSIONING INSTRUCTIONS
Step 1.
Commission the appliance as per the Commissioning Instruction located on top of the PCB within the engine as
per the instructions found in the engine installation manual. This includes the burn media.
Step 2.
Replace the fascia in reverse sequence to "Step 3. Remove Fascia" on page 9.
Step 3.
Complete the Installation Checklist and Installation Record found on pages 16 and 17 of the operations manual
found with the engine.
Step 4.
Clean up the installation site, remove any fingerprints from the cabinet and glass and you are now done.
Rinnai
18
650FS FIM
Advertisement
Table of Contents
