Table of Contents
Advertisement
CABINET INSTALLATION
Step 4.
Remove top panel.
1.
Remove the 3 black Phillips-head screws at the front of the unit.
2.
Carefully lift the front of the top panel up at the front taking care to clear the flue spigot.
3.
Then push it rearward clear of the 3 location tabs in the top face of the rear panel.
1.
Step 5.
Remove engine.
Engine is heavy. Two person lift required for this step.
CAUTION
1.
Remove the 6 Phillips-head screws located at the left and right of the engine side panels.
2.
Carefully slide the engine forward and out of the cabinet. Gently place it down out of the way.
x3
1.
Rinnai
2.
3.
x3
2.
10
650FS FIM
Advertisement
Table of Contents
