C H A P T E R 3 Installing Cisco Meetingplace Video Integration; Verifying Your Video-Conferencing License; About Configuring The Cisco Ipvc Mcu To Use Cisco Meetingplace - Cisco MeetingPlace Video Integration Administrator's Manual

Cisco systems meetingplace video integration administration guide
Table of Contents

Advertisement

Before You Install

Verifying your Video-Conferencing License

Make sure your Cisco MeetingPlace system is licensed for Cisco MeetingPlace Video Integration.
The Cisco MeetingPlace MeetingTime utility is fully documented in the Administrator's Guide for
Cisco MeetingPlace Audio Server Release 5.3.
In MeetingTime, click the Configure tab, then click System Options.
Step 1
Click Query.
Step 2
Click the > button until you see Cisco MeetingPlace Video Integration.
Step 3
Number of licenses should be 1. If it is 0 (zero) contact your Cisco technical support representative. See
Step 4
the Guide to Cisco Conferencing Documentation and Support.

About Configuring the Cisco IPVC MCU to Use Cisco MeetingPlace

Before you configure the Cisco IPVC MCU for Cisco MeetingPlace Video Integration, make sure that
the Cisco IPVC MCU is working independently of Cisco MeetingPlace Video Integration and can host
and manage video conferences.
For detailed information about video-conferencing parameters, see the Cisco IPVC MCU
documentation, including the Release Notes: Cisco IP/VC 3511 MCU and Cisco IP/VC 3540 MCU
Module Administrator Guide, Version 3.2 and Cisco IP/VC 3511 MCU and Cisco IP/VC 3540 MCU
Module Release Notes for Release 3.5.
All H.323 resources on the Cisco IPVC MCU are dedicated to a single Cisco MeetingPlace service, and
Cisco MeetingPlace controls all H.323 resources on the Cisco IPVC MCU. However, conferences can
be created using SCCP (SKINNY protocol), and Cisco MeetingPlace does not control those conferences.
Cisco IPVC MCU resources will be shared between the Cisco MeetingPlace service and any SCCP
services.
The unique service prefix associated with the Cisco MeetingPlace service will be used to route callers
to the Cisco IPVC MCU and must not conflict with other routing patterns in the gatekeeper or
Cisco CallManager.
The following optional cards for the Cisco IPVC MCU are not supported:
If your Cisco MeetingPlace audio server is configured to use only G.729, make sure the
Cisco IPVC MCU is configured to support G.729. A transcoder card may be needed. For information
about specifying an audio codec, see the online help for the Cisco IPVC MCU.
Administrator's Guide for Cisco MeetingPlace Video Integration Release 5.3
3-2
Release 5.3 of the Cisco MeetingPlace system is up and running, including Cisco MeetingPlace
audio server and Cisco MeetingPlace Web Conferencing.
All video endpoints that your organization supports (H.323, SCCP, and ISDN) can successfully
participate in video conferences on the Cisco IPVC MCU. Endpoints must be able to join both by
dialing in and by having the Cisco IPVC MCU call the endpoint.
Rate Matching card
Data Conferencing card
Chapter 3
Installing Cisco MeetingPlace Video Integration
OL-6280-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Meetingplace video integration 5.3

Table of Contents