Cisco MeetingPlace Video Integration Administrator's Manual page 31

Chapter 3 Installing Cisco MeetingPlace Video Integration
In the "Voice activate method" field, we recommend that you click All see one to have all participants
Step 5
see the current speaker.
To disable automatic switching of nonspeaking participants, uncheck Enable auto-switch.
Step 6
Step 7 To save these conference-view parameters and to close the Edit View dialog box, click OK.
Special Instructions for Accommodating SCCP Endpoints
Because SCCP endpoints require the H.263 format, special view settings are required. To set up views,
use the table in
use the appropriate procedure from this section.
If your users will attend via SCCP endpoints and your Cisco IPVC MCU has only an MP card, only the
Voice Activated view can be used. In this case, all participants will be able to use only the View Active
Speaker option available in the Cisco MeetingPlace meeting room. They will not be able to view multiple
people simultaneously.
Creating a Single Voice Activated View
Step 1 The default view should have the correct parameter settings. Verify that the settings are as follows:
Parameter
Initial Layout
Max Layout
Use Processor
Format (in the Video Schemes Settings section) H.263
Other parameters
Click OK.
Step 2
If your users will attend via SCCP endpoints and you have both an MP card and an EMP card, in order
for participants to be able to use both the View Active Speaker and the View Multiple People options
that are available in the Cisco MeetingPlace web-conferencing meeting room, both views are required.
The View Active Speaker option corresponds to the Voice Activated view, and View Multiple People
corresponds to the Continuous Presence view.
Creating Two Separate Views
In the service, click the Views button to create the first view.
Step 1
Set the following parameters for this view:
Step 2
OL-6280-01
Using Preconfigured Service Templates, page 3-5
Administrator's Guide for Cisco MeetingPlace Video Integration Release 5.3
as a model for setting parameters, or
Value
1-participant layout
1-participant layout
MP
As desired
Before You Install
3-9