Installing Cisco Meetingplace Video Integration; Before You Install; Making Sure Component Systems Are Up And Running - Cisco MeetingPlace Video Integration Administrator's Manual

Installing Cisco MeetingPlace Video Integration

Perform the following tasks to set up Cisco MeetingPlace Video Integration:
•
•
•

Before You Install

Complete the following tasks in order before you run the Cisco MeetingPlace Video Integration
installer:
•
•
•
•
•
•
•
•
•
•
•
•

Making Sure Component Systems Are Up and Running

Several component systems must be working independently before you prepare to install
Cisco MeetingPlace Video Integration.
Step 1 Make sure that the following are true:
OL-6280-01
Before You Install, page 3-1
Installing Cisco MeetingPlace Video Integration, page 3-18
Uninstalling Cisco MeetingPlace Video Integration, page 3-19
Making Sure Component Systems Are Up and Running, page 3-1
Verifying your Video-Conferencing License, page 3-2
About Configuring the Cisco IPVC MCU to Use Cisco MeetingPlace, page 3-2
Configuring the Cisco MeetingPlace Audio Server, page 3-11
Configuring Cisco MeetingPlace H.323/SIP IP Gateway, page 3-12
Configuring Load-Balancing Configurations for Video Conferencing, page 3-12
About Installing and Configuring Video Endpoints, page 3-13
(Optional) Configuring Cisco MeetingPlace for Outlook, page 3-14
(Optional) Configuring Cisco MeetingPlace for Lotus Notes, page 3-14
Configuring Cisco CallManager, page 3-14
Preparing to Install the Video Integration with DMZ Configurations, page 3-17
Gathering Installation Values, page 3-18
Administrator's Guide for Cisco MeetingPlace Video Integration Release 5.3
C H A P T E R
3
3-1