Compaq 1610 Reference Manual page 95

PC Card is not
recognized as part of
the system.
Device shuts down
while the PC Card is in
use.
PC Card does not
work properly.
.
Drivers must be
installed.
Cables or power cords
attaching the PC Card
are loose or
unplugged.
PC Card is not seated
properly.
The PC Card drains
too much power from
the device batteries.
Card or card driver is
not compatible with the
handheld PC.
PC Card is not seated
properly.
If using a PC Card
modem, the modem
cable is not plugged in
all the way.
Check the
documentation
included with the PC
Card for information on
installing drivers on the
handheld PC.
Ensure that cables are
properly and securely
connected.
Remove and reinsert
the card correctly.
1. Remove the PC
Card.
2. Connect the
device to external
power and reinsert
the PC Card.
For more information,
see Chapter 6, "Using
PC Cards."
Refer to the
documentation
that came with
your PC Card.
Visit the C-Series
home page on the
Internet for a list of
PC Cards
supported by
Compaq.
Remove and reinsert
the card correctly.
Secure the modem
cable connection.