Compaq 1610 Reference Manual page 119

An FCC Compliant 6-position modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone
network or premises wiring using a compatible 6-position modular jack
which is FCC Part 68 Compliant
(jack type: RJ-11C).
If your telephone equipment causes harm to the telephone
network, the telephone company may discontinue your service
temporarily. If possible, they will notify you in advance. But, if
advance notice is not practical, you will be notified as soon as
possible. You will also be informed of your right to file a
complaint with the FCC.
Your telephone company may make changes in its facilities,
equipment, operations, or procedures that could affect the proper
functioning of your equipment. If they do, you will be notified in
advance to give you an opportunity to maintain uninterrupted
telephone service.
If you experience trouble with this telephone equipment, contact
your local telephone company for information on obtaining
service or repairs. The telephone company may ask that you
disconnect this equipment from the network until the problem has
been corrected or until you are sure that the equipment is not
malfunctioning.
This equipment may not be used on coin service provided by the
telephone company. Connection to party lines is subject to state
tariffs.
For the Compaq Customer Support Center and your nearest
Compaq authorized reseller in North America, call
1-800-345-1518 or write:
Compaq Customer Support Center
P.O. Box 692000
Houston, Texas 77269-2000