Compaq 1610 Reference Manual page 62

To record a voice message, follow these steps:
1. Press and hold the record button (located on the left front
panel of the device).
2. After you hear the beep, speak into the microphone to record
your message.
3. When finished recording, release the record button.
You can also record a message by launching Voice Memo via the
application launch keys (
tap the Record button at the top of the screen to start recording.
Tap Stop Recording when you're done.
You can record a message while the lid is open or closed.
When the lid is open, you will see a message on the screen
showing the duration, size, and available space for the recording.
Use this information to allow yourself enough space to make a
complete recording. If your handheld PC runs out of space, it will
stop recording and display an error message.
Each message can be up to 10 minutes in duration.
The total amount of time available for recordings depends on the
amount of available space remaining in memory.
To listen to a message once it's been recorded, follow these steps:
1. Open the Voice Memo application.
2. In the left pane of the Voice Memo window, open the folder
containing the file you want to play, then select the file.
All newly recorded messages are stored in the New
NOTE:
Memos folder by default.
To play the message, tap the Play button on the toolbar or
3.
double-tap the file name.
). Once the Voice Memo is open,