Compaq 1610 Reference Manual page 72

Backup Tips
Use dual backup mode if you have sufficient space on your
PC Card.
If you run out of space on your PC Card when using dual
backup mode, delete the \BackupB folder on the PC Card and
use single backup mode.
To restore a backup onto your C-Series, follow these steps:
1. Reset your handheld PC to its original factory settings by
following the procedure in "Performing a Full Reset" in
Chapter 4, "Using Power."
2. Turn on the handheld PC and insert the ATA Flash RAM PC
Card into the PC Card slot.
3. Run the Restore utility by tapping Start Programs
Compaq Applications Restore.
4. Follow the instructions that appear on the screen.
5. When the restore process is complete, press the reset button to
restart your handheld device.
6. Set the correct time and date using the World Clock applet in
the Control Panel.
If Restore detects that you don't have a good backup file from
which to perform the restore, you can still perform a manual
restore by copying selected files and folders from your PC Card
to your handheld PC.
For more information on this and other errors, visit the Compaq
web site at www.compaq.com/products/handhelds.