Replacing Batteries - Compaq 1610 Reference Manual

Enable suspend while on external power
To auto-suspend the device while it is connected to AC power
or automobile power, follow these steps:
Tap Start Settings Control Panel, then double-tap the
1.
Power icon.
Tap the Power Off tab, then place a check in the
2.
appropriate checkbox.
Turn off sounds
Tap Start Settings Control Panel Sounds and turn off
sound events that you do not need.
Improper handling of batteries can cause fire, personal injury, or
damage to the C-Series. Observe the following precautions when

replacing batteries:

Be sure the polarity (+ and - ends) of each battery is correct
when you install it in the handheld PC.
Do not mix old batteries with new ones.
Use only the types of batteries specified in this chapter.
Keep track of the main and backup battery life by frequently
checking battery status via the Power Properties box in the
Control Panel. If the batteries used for both power supplies
are low at the same time, data stored in memory can be
corrupted or lost.
Before replacing any batteries, Compaq recommends
performing a data backup. For complete instructions on this, see
"Using the Backup and Restore Utilities" in Chapter 8, "Using
Compaq Software."