Rules List - TP-Link TL-WR841N User Manual

Chapter 4
2. Go to
3. Configure the bandwidth as needed and click Save.
The values you configure for the Egress Bandwidth and Ingress Bandwidth should be
less than 100,000Kbps. For optimal control of the bandwidth, please select the right
Line Type and consult your ISP for the total egress and ingress bandwidth.
• Enable Bandwidth Control
can take effect.
• Line Type
please consult your ISP.
• Egress Bandwidth
• Ingress Bandwidth

4. 12. 2. Rules List

1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
Control rules.
• Description
• Egress Bandwidth
the WAN port. The default is 0.
• Ingress Bandwidth
the WAN port. The default is 0.
• Enable
• Modify
Downloaded from ManualsNet.com
Bandwidth Control > Control
- Check this box so that the Bandwidth Control settings
- Select the right type for you network connection. If you are not sure,
- The upload speed through the WAN port.
- The download speed through the WAN port.
Bandwidth Control > Rules
- This is the information about the rules such as address range.
- This field displays the max and min upload bandwidth through
- This field displays the max and min download bandwidth through
- This field displays the status of the rule.
- Click Modify/Delete to edit/delete the rule.
search engine
Settings.
List, and you can view and configure the Bandwidth
Configure
52