Bandwidth Control; Control Settings; Rules List - TP-Link TL-MR3420 User Manual

5.10 Bandwidth Control

Figure 5-64 Bandwidth Control
There are two submenus under the Bandwidth Control menu as shown in Figure 5-64: Control
Settings and Rules List. Click any of them, and you will be able to configure the corresponding
function. The detailed explanations for each submenu are provided below.

Note:
Bandwidth Control will become invalid if NAT Boost is enabled. If you want to enable Bandwidth
Control, please go to "Advanced→NAT Boost" to disable NAT Boost first.

5.10.1 Control Settings

Choose menu "Advanced → Bandwidth Control → Control Settings", and then you can
configure the Egress Bandwidth and Ingress Bandwidth in the next screen. For optimal control
of the bandwidth, please select the right Line Type and ask your ISP for the total bandwidth of
the egress and ingress.
Enable Bandwidth Control - Select this checkbox so that the Bandwidth Control settings

can take effect.
Line Type - Select the right type for you network connection. If you don't know how to

choose, please ask your ISP for the information.
Egress Bandwidth - The upload speed through the Internet port

Ingress Bandwidth - The download speed through the Internet port.


5.10.2 Rules List

Choose menu "Advanced→Bandwidth Control→Rules List", and then you can view and
configure the Bandwidth Control rules in the screen below.
TL-MR3420
Figure 5-65 Bandwidth Control Settings
-72-
3G/4G Wireless N Router User Guide
.